Homeowners, woodworking hobbyists, and DIYers often don’t have a lot of money to spend on their tools. So, when a special deal comes along they take advantage of it. Such is the case with a Factory-Reconditioned Ryobi RTS10 10 in.
Priced attractively under the price you would pay for a comparable DeWalt, Bosch, or even a SKIL table saw. It offers many of the benefits that these more expensive units have to offer and at a deep discount price. So if you’re laying a floor in the kitchen or bath for the wife. Adding in addition to the house, cutting paneling, or need to trim got after laying carpeting.
Refurbished means better than new. When Ryobi refinishes a product it brings the product in as used, replaces worn parts, and performs cosmetic touchups and realignment, so the machine is in like-new condition and often in better condition than when it was originally sold.
So for you the homeowner, or part-time renovator, or hobbyist this is a true bargain. While not as lightweight as the Bosch, it still is a highly portable and useful tool, which can go anywhere you need it. This means if you’re having a house built or renovating one before moving in you can move your workshop right on-site. This means you don’t have to wait for custom cut parts to be delivered you can make them yourself specifically to fit the current needs of the job.
With its small size, it can fit into almost any vehicle for transportation to where the work is needed to be done. And when not in use it takes up very little room in an often crowded and minuscule workshop in either a basement or in a new section of your garage.
Say Goodbye Using That Portable Saw
You no longer have to rely on sawhorses and portable circular saws. Now you can get precision cuts on your very own table saw that comes with its stand. Since 1943 Ryobi of Japan has been a manufacturer of fine power tools and other products to make living easier.
The Ryobi RTS10 is no exception as it provides a simple and easy to operate power saw that is both powerful with its 15-amp motor and portable as well. This gives you the advantage of cutting through most thicknesses of plywood and varying widths of planking.
Where it excels is laying down flooring, paneling, and cutting tiles for either bathroom walls or the floor. Shaped to fit in confined spaces it can be carried in the trunk of a car, in the back of an SUV, or pick up truck. This means your Ryobi RTS10 table saw goes anywhere your work needs to be done.
The Advantage of an Expanded Rip Capacity
The Ryobi RTS10 expands to 12 inches on the right and eight on the left that gives you great flexibility in the size of cuts you need to make. Its all-aluminum construction makes for a rugged design yet is lightweight and easy to transport at only 52 pounds which means it weighs about the same as some of the more expensive brands.
This portability and flexibility enhance your abilities to get the job done right the first time with the precise cut you need. With its built-in miter gauge, you also get the angle you need which makes it perfect as a portable miter saw as well. This kills two birds with one stone. Or means you only have to carry one power tool to the job.
Factory-Reconditioned Ryobi ZRRTS10 10 in. Portable Table Saw w/ Stand
The features of this table saw show its ruggedness and its versatility that allows it to be used for almost any workshop, remodeling, or renovation job you may be contemplating doing.
Here are some of the features that the Ryobi has to offer:
- High Energy 15 Amp motor
- Lightweight design for easy transport
- Expanded rip capacity 12 in. right of the blade and 8 in. left of the blade
- Adjustable miter gauge for accurate cross cuts
- Item Weight 51.7 pounds
- Product Dimensions 27.6 x 19.7 x 13 inches
- Power Source corded-electric
- Voltage 120 volts
- Stand Included
- Aluminum Construction to Keeps weight down
- Easy to Transport
- Attractive Pricing
- Cuts 1x and 2x Stock
- Also Useful for 1/2″ to 3/4″ Plywood
- Great for around House Renovations or on a makeover job at home of friends and family.
- Sets up in a Flash
All products especially power tools have to function in a variety of environments and during the design process of these tools certain compromises are often made. The Ryobi is no exception to this rule and the following deficiencies were noted:
- The miter adjustment knob rubs against the height Knob.
- The blade guard could be of better quality.
- The guide and fencing are lighter than expected on a tool of this kind.
While none of these deficiencies are show stoppers that would prevent the safe, use for the precision of which it works it does mean that more attention to detail is required to get the results you want.